|
ZL21 type fiber filter rod making combination is composed of YL11 opening & gluing machine and YL21 filter rod shaping machine. It uses cellulose acetate or polypropylene fiber bundles as raw materials. Through such procedures as air opening, screw opening, gluing, packing and rolling, side sealing shaping and cutting manufactures the filter rods of equal length that comply with the requirements for butting.
This unit operates in 2-stage air opening and 2-stage screw roller opening, thus good opening effect will be achieved. The cigarette pipe from this unit is an integral one, thus good roundness of the filter rods will be guaranteed. Cornstarch paste is used for side packing, thus firm bonding is ensured. With the using of a seven-vane expansion and shrinkage fabric tape wheel, the errors of the filter rod length could be effectively controlled. This machine unit has simple structure, steady and reliable performance, and it is easy to operate. The filter rods made by this unit can meet the requirements of high-speed butting.
This machine set can be used for producing both cellulose acetate rods and polypropylene fiber filter rod, and it is applicable for a wide range of raw materials. It has low requirements for auxiliary materials and has high cost performance ratio. So, it is the most ideal machine unit for the small cigarette factories.
This unit allows side sealing with pasting device or automatic-flow PVA white emulsion device.
This unit can use split pipe or integral pipe with double searing irons.
Z121 Type machine is widely applied in the production of polypropylene fiber filter rods.
| 
Current location：
Product
